Star Dabs Live Resin is a weed concentrate separate from newly gathere maryjane plant material that has been streak frozen (or new frozen) at sublevel temperatures, impacte with solvents like butane, propane, or butane hash oil (BHO), and squeeze. This novel extraction strategy is precisely the exact thing that makes this concentrate so esteemed. It permits the relieving and drying moves to skip. All things considered, the new or “live” plant is frozen not long after the collecting. This makes sense of why certain marijuana items you might have found in the market are classified as “live.
To use Star Dads resin follow these steps:
1. Prepare your work area: Make sure you have a clean and well-ventilated space to work in. Cover your workspace with a plastic sheet or newspaper to protect it from any spills or drips.
2. Prepare your resin: Start by mixing equal parts of the resin and hardener in a disposable cup. Use a stir stick or a craft stick to thoroughly mix the two components together. Be sure to follow the instructions provided by the manufacturer for the correct mixing ratio and time.
3. Add color (optional): If you want to add color to your resin, you can use resin pigments or dyes. Add a small amount of pigment or dye to the mixed resin and stir until it is evenly distributed. Remember that a little goes a long way, so start with a small amount and add more if needed.
4. Pour the resin: Carefully pour the mixed resin into your desired mold or onto your project surface. If you are using a mold, make sure it is clean and free from any dust or debris. Pour the resin slowly and evenly to avoid trapping air bubbles.
5. Remove air bubbles: After pouring the resin, you may notice air bubbles rising to the surface. To remove them, you can use a heat gun or a small torch to gently pass over the surface of the resin. Alternatively, you can use a toothpick or a pin to pop the bubbles manually.
6. Cure the resin: Follow the manufacturer’s instructions for curing the resin. This usually involves allowing it to dry and harden for a specific amount of time. Keep in mind that curing times can vary depending on the brand and type of resin you are using.